Published Nov 17, 2026, 11:00 AM EST Aggy is a veteran writer and editor in the technology and gaming space. Having served as a Managing Editor for high-traffic digital publications, alongside being an editor and consultant for over a dozen sites. Aggy's published work spans a wide and respected array of tech and gaming outlets, including WePC, Screen Rant, How-To Geek, Android Police, PC Invasion, and Try Hard Guides. Beyond editorial work, Aggy's direct experience in the tech sphere extends to app development. Aggy has published two games under Tales and is always eager to learn and do more. He also likes working on computers and researching in his spare time. He knows about Windows, Linux, Audio, Video, and much more. There are too many TikToks claiming you absolutely need certain tools. I'll watch them and see the comments filled with people fooled by someone who found a rare situation and made it seem common. Pro tools are built for people who use them every day, so they're easy to overspend on when you only tackle a project now and then. Other tools you may only need once, so buying them would be a waste of money. Luckily, I know which ones to avoid. A framing nailer is too much for home projects It costs more than you'd think, and it's heavy Credit: Milwaukee Framing nailers pound big nails into structural lumber on job sites, and are the tool crews use to frame walls, build roof trusses, and fasten subfloors. Pneumatic versions use an air compressor running at high pressure, and cordless ones use a battery-powered motor to build up and release energy. Either way, these things are heavy and built for serious work. The price is the whole problem for most people, since a decent setup can be costly once you add a compressor or spare batteries. The nails cost more than finish nails, too. The nailers themselves are heavier than you think, usually seven to 12 pounds, which tires you out fast when you're working overhead or in a tight spot. You're likely not putting an entire house together, so you won't need a tool like this. Framing nailers are also just wrong for most home projects. They're made to punch through thick lumber, not trim or thin plywood. You'll likely shoot right through whatever you aimed at, and you'll end up with ugly little craters. For anything you'd normally do around the house, just use a hammer and regular nails. A track saw isn't always needed Your circular saw can do many of the same cuts Track saws are pretty impressive because you mount a saw on an aluminum rail, and it glides along, making perfectly straight, splinter-free cuts. They're so important for cabinetmakers and mill workers who cut hundreds of sheets of expensive plywood all the time. But if you're just doing a weekend project, they cost a lot for what you get. A basic track saw kit is expensive and gets a lot pricier when you add longer rails and other accessories. If you're only cutting a few sheets of plywood a year, you'll never come close to getting your money's worth. A regular circular saw you probably already own can do the same job if you clamp a straight piece of aluminum or even a factory-cut strip of plywood along your cut line. Also, if you put a strip of painter's tape over your cut line, or score it lightly first with a utility knife, you'll avoid splinters. A few friends of mine say a blade with more teeth helps too. These are old tricks that work well and cost almost nothing. I'm not saying track saws aren't worth the money, but if this isn't your job, you don't need them. A rotary hammer isn't a stronger drill A hammer drill will handle most of your jobs Rotary hammers are built to drill into concrete, stone, and reinforced foundations. You don't need to push down hard because the tool has an internal piston to slam the drill bit into the material with real force. SDS bits lock into a special chuck that lets them slide back and forth as the hammer fires. It's a totally different machine from a regular drill. The problem is that a lot of people buy one thinking it's just a beefier version of their cordless drill, but it isn't. Rotary hammers are expensive and can't even accept standard drill bits without an adapter. If you're just hanging a TV mount or putting up blinds, you're buying a heavy, expensive, single-purpose machine for jobs that don't need it. Also, rotary hammers aren't precise and are brutal on delicate materials. If you put it against old brick, decorative stone, bathroom tile, or something else that isn't as strong, you're probably going to crack the surrounding area or blow out the back of the wall. Use a regular hammer drill if you need something similar to this. Switch on the hammer mode, and it delivers thousands of small vibrations per minute, which works great on brick, block, and mortar without destroying things. Switch it off, and you've got a regular drill driver for everyday work. A big router table is built for pro shops You need real experience to use it safely Credit: Skil A full router table setup, with a big 3-horsepower router mounted underneath a cast-iron table, is what a professional cabinet shop uses to cut raised panel doors, mill long moldings, and plow deep joints in hardwood all day long. You likely don't need one, which is lucky because it can cost over a thousand dollars. The bits for a router that size are also expensive, and the table weighs a lot and takes up a good amount of space. Even if you don't mind spending the money, you need experience to use this right. You need to get the bit height right, dial in the fence, and set up featherboards correctly. If you feed wood the wrong direction or take too big a cut, the bit can grab the piece and throw it. A bench-top jointer won't do much for you It's too short to flatten long boards Credit: Pexcho A jointer is the machine woodworkers use to flatten warped boards and get a perfectly square edge on rough lumber. The board passes over a spinning cutter between two flat tables, and each pass shaves off a little more until the face or edge is true. I've seen plenty of videos on TikTok showing the process, and it's so fun to watch. It's a workhorse in a professional shop with a big floor-standing model, but it won't feel the same on the compact bench-top version. What keeps it out of most garages is the table length. Big jointers have beds that stretch five to seven feet, which gives long boards proper support as they pass over the cutter. You could try to run a common six- or eight-foot board across it, but the overhanging weight tips and sags, which will make the board worse instead of better. These machines are noisy, messy, and annoying to maintain too. Just go to a shop if you need something like this done. I tend to go to Home Depot, buy the wood close to the size I need, and the store makes two cuts for free. These are still great tools The tools here are great if you use them daily, and if your hobby turns into a side business, the math changes quickly. For most of us, a weekend project doesn't justify a thousand-dollar machine that eats up shelf space. Start with what you already own and see how far it gets you.
5 power tools you should avoid if you don't want to waste your money
Full Article
Original Source
Read the full article at Howtogeek →KhanList aggregates and links to publicly available news content. We do not host full articles from third-party sources. Always verify important information with original sources.